- Sku:
Spaguard PH Decreaser (22 oz)
SpaGuard pH decreaser is a dry, granular product that gradually lowers your pH and alkalinity level. Your pH level should be maintained at 7.2-7.6, as measured by an accurate testing method.
SpaGuard is a dry, granular product and is safer and easier to use than liquid acids.
Product Information:
93.2% granular sodium bisulfate
Lowers pH and total alkalinity
Protects spa and equipment due to improper pH
Prevents cloudy water due to high pH
Balances water for bather comfort
Directions for use:
1. if pH rises above 7.6 apply product as directed below
2. Apply by broadcasting product evenly across the spa with the pump running
3. Circulate for 30 minutes and retest pH
pH Range 7.6 to 7.8:
1/2 tsp per 200 gallons
pH Range 7.8 to 8.0:
3/4 tsp per 200 gallons
pH Range 8.0 to 8.4:
1 1/2 tsp per 200 gallons
pH Range 8.4 and above:
2 tsp per 200 gallons
For more information on Spa Guard Products, please watch this informational video.
PRODUCT FAQ'S
The force and velocity of aerated water keeps water moving so the filter can remove suspended debris. Circulation also ensures that the chemicals are thoroughly distributed. Dead spots are usually not as prevalent in a spa as they are in a pool.
With the dirt, sweat and oils released in a spa, good filtration is essential. Cartridge filters are the typical choice and because of the increase in the amount of filterable debris, the filter should be regularly cleaned with a garden hose or chemically cleaned at refill.
Cleaning a spa involves several aspects of care, including the removal of obvious debris by skimming or vacuuming, and removal of body oils that are rinsed off bathers. Also, be sure to wipe surfaces after heavy use.
Bacteria and algae grow much faster in a spa than in a pool. As a result, spa owners need to follow a regular and complete chemical treatment routine. Spa chemistry includes water balance, sanitizer and oxidizer applications.
Fewer gallons of water mean changes in water balance happen faster. Add to this the aerated water, increased water temperature, and the heavier bather loads, and it’s easy to see the importance of regular testing. Adjust the balance and sanitizer levels as needed.
Sooner or later, the water reaches a point where it just gets “worn out” from the bather load. When the water looks bad, smells bad, and feels bad it’s time for a change. It is recommended that you drain and refill your spa with fresh water approximately every 3 months.
Spaguard PH Decreaser (22 oz)
