Skip to product information
  • Sku:

Leisure Time Spa Down 2.5 lb

$19.99
 per 
In stock!

Leisure Time Spa Down is a granular product that adjusts water pH and alkalinity. It provides a greater amount of control for large and commercial spas. Keeping your spa's pH balanced is an important part in maintaining proper water chemistry. Proper pH balance increases effectiveness of the sanitizer, thus lowering maintenance costs. Spa Down is compatible with bromine, chlorine, and biguanide sanitizers.


Dosage

Routine Maintenance:

1/4 oz at a time until desired ph & alkalinity level reached.


Directions

  1. Make sure all equipment is off.
  2. Add 1/4 oz. (1-1/2 tsp.) to the spa water.
  3. Turn on circulation system for 30 minutes.
  4. Retest water. If pH is still above 7.8, repeat steps 1-3.

Ingredients

Sodium Bisulfate: 95%, Other Ingredients: 5%

View full details

For more information on Leisure Time products, please watch this informational video.

PRODUCT FAQ'S

Should I treat my spa water the same way as I treat my pool water?

Although the pH and total alkalinity measurements are the same, the sanitizer level (bromine or chlorine) should be kept between 3-5 ppm. In a spa, the filter requires more frequent cleanings. In addition, the water will require more frequent care to assure pH and sanitizer levels are correct. For further details, please see our spa care guides.

I can’t seem to control my pH. It seems to be high one day, then low the next. What can I do?

Controlling the pH in a spa can be challenging. Using Leisure Time® pH Balance Plus every time the spa is refilled will lock the pH in the proper range until the spa is drained again (usually 90 days).

I am using bromine tablets to sanitize my spa and the directions for use say I need to add a “bromide bank” first. Why do I need to do this?

It is recommended that you add this “bank” in order to ensure that the sanitizer in the water is all bromine from the moment you first start using it.

My spa has an ozonator. I have heard that I should not use a clarifier in my spa. Why?

Too little calcium in the water can cause foaming and corrosion, particularly in heaters and other metal components. To increase the hardness to the recommended level of 150-400 ppm, add a calcium hardness increaser such as Leisure Time® Calcium Booster. Too much calcium can cause scaling on the walls and heating elements or cloudy water. To prevent calcium in the water from causing these problems, add a sequestering agent such as Leisure Time® Defender.

My spa has an ozonator. I have heard that I should not use a clarifier in my spa. Why?

Ozone is a highly reactive oxidizing agent. Some people are under the impression that ozone will destroy clarifiers and make them ineffective. We have found, however, that ozone does not affect the effectiveness of clarifiers. Clarifiers do provide a very real benefit in ozonated spas by helping the filter keep the water clean.

My cartridge filter is dirty, and I was told to just put it in my dishwasher to clean it. Is this the best way?

The dishwasher may damage the fabric on the filter. The best way to clean your filter is to soak it in a bucket of water with Leisure Time® Filter Clean. This will ensure that all oils, lotions and minerals will be removed from the filter. For quick cleanings, use Leisure Time® Instant Cartridge Clean.

Leisure Time Spa Down 2.5 lb

$19.99
 per 

RECENTLY VIEWED PRODUCTS

loading