- Sku:
Spaguard Spa Shock Oxidizer
This non-chlorine shock is the ideal oxidizer for spas with an ionizer unit. It makes undesirable compounds disappear. Spa Shock is simple to use - just apply directly into your spa water while the pump is circulating. Try Spa Shock in two convenient sizes of 35-oz and 7-lbs. Can be used with chlorinated or brominated spas, does not raise chlorine residual, quick dissolving shock treatment, destroys organic contaminants, non-chlorine sanitizer.
Product Information:
31% potassium peroxymonsulfate
Approximately 3.2% active oxygen
pH 8.6
Non-chlorine oxidizer
Can be used with chlorinated or brominated spas
Does not raise chlorine residual
Quick dissolving shock treatment
Destroys organic contaminates
(Note: This product does not replace the need for regular application of chlorine or bromine sanitizer)
Directions for use:
For initial treatment
1. Apply 2 ounces per 300 gallons with the pump running
2. Run pump for 15 minutes after addition
For routine maintenance
1. Apply 1 ounce per 300 galloons weekly
2. For heavily used spas, treat twice weekly
For more information on Spa Guard Products, please watch this informational video.
PRODUCT FAQ'S
The force and velocity of aerated water keeps water moving so the filter can remove suspended debris. Circulation also ensures that the chemicals are thoroughly distributed. Dead spots are usually not as prevalent in a spa as they are in a pool.
With the dirt, sweat and oils released in a spa, good filtration is essential. Cartridge filters are the typical choice and because of the increase in the amount of filterable debris, the filter should be regularly cleaned with a garden hose or chemically cleaned at refill.
Cleaning a spa involves several aspects of care, including the removal of obvious debris by skimming or vacuuming, and removal of body oils that are rinsed off bathers. Also, be sure to wipe surfaces after heavy use.
Bacteria and algae grow much faster in a spa than in a pool. As a result, spa owners need to follow a regular and complete chemical treatment routine. Spa chemistry includes water balance, sanitizer and oxidizer applications.
Fewer gallons of water mean changes in water balance happen faster. Add to this the aerated water, increased water temperature, and the heavier bather loads, and it’s easy to see the importance of regular testing. Adjust the balance and sanitizer levels as needed.
Sooner or later, the water reaches a point where it just gets “worn out” from the bather load. When the water looks bad, smells bad, and feels bad it’s time for a change. It is recommended that you drain and refill your spa with fresh water approximately every 3 months.
Spaguard Spa Shock Oxidizer
