- Sku:
Total Alkalinity Increaser (20 lb)
BAQUACIL Total Alkalinity Increaser (20 lb) is designed to raise the total alkalinity level in your Baquacil treat pool.
Total Alkalinity should be between 80-150 ppm.
Product Dosage 3 lb per 10,000 gallons to raise Total Alkalinity by 20 ppm.
Directions Test your water's total alkalinity every week with your Baquacil Test strips and adjust as necessary.
Generally, 3 lb of Baquacil Total Alkalinity Increaser in 10,000 gallons of pool water will raise total alkalinity by 20 ppm.
Allow the water to circulate for 12 to 24 hours.
Recheck your alkalinity reading.
Repeat treatment as necessary until an alkalinity between 80-150 ppm is obtained.
Ingredients Sodium Bicarbonate: 100%
For more information on Baquacil Products, please watch this informational video.
PRODUCT FAQ'S
The BAQUACIL® CDX® Pool Care System is a complete pool sanitizing system consisting of chlorine-free Swimming Pool Sanitizer & Algistat, Oxidizer, and CDX® oxidizer product. The product that actually kills bacteria in pool water is Swimming Pool Sanitizer & Algistat. The two other products in the system work with this product to keep your pool sparkling clear and algae free.
The active ingredient in Swimming Pool Sanitizer & Algistat is polyhexamethylene biguanide. It's so gentle it is used in some contact lens cleaning solutions and the chemical structure makes it extremely stable. So, unlike some other sanitizers, it is not affected by sunlight, temperature, and pH fluctuations.
Yes, you can use the same balance chemicals if you are on chlorine or the BAQUACIL® Pool Care System.
Basically there are two ways to clean your filter: physically and chemically. Physical cleaning (backwashing, bumping, or hosing off a cartridge) should be done if the pressure on the filter gauge is 8-10 psi above the starting pressure when the filter is clean. A filter should be chemically cleaned at least twice a season (middle and end of season) with BAQUACIL® Universal Filter Cleaner to dislodge any deeply embedded dirt or break up and remove any debris such as grease, oil or scale. If you keep your pool open year round, we suggest you chemically clean your filter three times a year.
For all filters use BAQUACIL® UNIVERSAL FILTER CLEANER.
The BAQUACIL® Pool Care System is different from chlorine and bromine-based pool sanitizers. For that reason, many chemicals that work with one system won't work with the other. The BAQUACIL® CDX® Pool Care System is not compatible with chlorine, bromine, any copper based chemical or non-chlorine shock. Always check with your Authorized BAQUACIL® Dealer before adding supplemental chemicals to your pool.
No, converting your pool to the BAQUACIL® CDX® Pool Care System is a very easy process that usually takes less than 24 hours. Consult your nearest local Authorized BAQUACIL® Dealer and they will instruct you on the proper procedures to start your pool on the BAQUACIL® CDX® Pool Care System. Don't forget to ask about our BAQUACIL® CDX® System Kit — it contains all the products you need to convert your pool to the chlorine-free BAQUACIL® CDX® System.
Total Alkalinity Increaser (20 lb)
