- Sku:
Baquacil Surface Cleaner (16 oz)
BAQUACIL Surface Cleaner (1 pt) is great at removing stains, oils, dirt, scum and scale from your pool.
This product works above and below the waterline.
This great product does not leave a residue and will not affect water chemistry.
Directions: Scum Line Cleaning: Apply a one-inch ribbon of Baquacil Surface Clean to a wet nonabrasive scrub pad.
Apply product to a 2 to 3 foot section of area to be cleaned. Using gentle pressure scrub area with a pad.
Thoroughly rinse treated area.
For stubborn stains and tile grout, let product stand on affected area for a couple of minutes before scrubbing.
Use a soft-bristled brush for tile grout.
For light tile-line cleaning, dilute Baquacil Surface Cleaner in warm water.
Use three ounces of Baquacil Surface Cleaner to one gallon of water.
Underwater Housekeeping: Apply Baquacil Surface Cleaner directly to pool brush head or other submersible applicator.
Scrub affected areas. Note: The water may cloud temporarily as a result of the detergent in the product.
Simply run the filter while cleaning, and cloudiness will disappear in a few minutes. Ingredients Hydrochloric Acid: 10.1%
For more information on Baquacil Products, please watch this informational video.
PRODUCT FAQ'S
The BAQUACIL® CDX® Pool Care System is a complete pool sanitizing system consisting of chlorine-free Swimming Pool Sanitizer & Algistat, Oxidizer, and CDX® oxidizer product. The product that actually kills bacteria in pool water is Swimming Pool Sanitizer & Algistat. The two other products in the system work with this product to keep your pool sparkling clear and algae free.
The active ingredient in Swimming Pool Sanitizer & Algistat is polyhexamethylene biguanide. It's so gentle it is used in some contact lens cleaning solutions and the chemical structure makes it extremely stable. So, unlike some other sanitizers, it is not affected by sunlight, temperature, and pH fluctuations.
Yes, you can use the same balance chemicals if you are on chlorine or the BAQUACIL® Pool Care System.
Basically there are two ways to clean your filter: physically and chemically. Physical cleaning (backwashing, bumping, or hosing off a cartridge) should be done if the pressure on the filter gauge is 8-10 psi above the starting pressure when the filter is clean. A filter should be chemically cleaned at least twice a season (middle and end of season) with BAQUACIL® Universal Filter Cleaner to dislodge any deeply embedded dirt or break up and remove any debris such as grease, oil or scale. If you keep your pool open year round, we suggest you chemically clean your filter three times a year.
For all filters use BAQUACIL® UNIVERSAL FILTER CLEANER.
The BAQUACIL® Pool Care System is different from chlorine and bromine-based pool sanitizers. For that reason, many chemicals that work with one system won't work with the other. The BAQUACIL® CDX® Pool Care System is not compatible with chlorine, bromine, any copper based chemical or non-chlorine shock. Always check with your Authorized BAQUACIL® Dealer before adding supplemental chemicals to your pool.
No, converting your pool to the BAQUACIL® CDX® Pool Care System is a very easy process that usually takes less than 24 hours. Consult your nearest local Authorized BAQUACIL® Dealer and they will instruct you on the proper procedures to start your pool on the BAQUACIL® CDX® Pool Care System. Don't forget to ask about our BAQUACIL® CDX® System Kit — it contains all the products you need to convert your pool to the chlorine-free BAQUACIL® CDX® System.
Baquacil Surface Cleaner (16 oz)
